OBTAIN A PRICE FOR YOUR PROJECT USING OUR GET A QUOTE FEATURE

Flat Roofing and Flat Roof Construction by Roof Technology

0118 9455511
Ruvitex

Ruvitex

Manufactures a range of single ply membranes for different roofing applications

You are here: Home > Flat Roofing > Ruvitex
Sika Sarnafil
Sika Plan
Ruvitex
Rubber Bond EPDM
Refurbishment/Repair
Insulation
Natural Light
Green Roofs

Each of the Ruvitex membranes that we use are designed to fulfil the requirements of any flat roof application - whether your project is a new build or a refurbishment 

Ruvitex membranes are manufactured in line with stringent demands of the EU, to Provide protection for your property.

The metal Ruvitex-coated perimeter edging trims will give your flat roof a neat, crisp perimeter finish that will not deteriorate over time, as can be the case with other felt or bitumen flat roofing products.

Joints & laps are welded with a hot air gun at temperatures of up to 500 degrees; this alleviates the need for naked flames or hot bitumen tubs that are common to other flat roofing products. 

The Ruvitex flat roofing materials must be installed onto a sound base, using either 18mm OSB sterling board or ply (for a cold deck) or, if the specification requires a warm deck construction then a tissue or foil faced polyurethane insulation board can be used. 

Mechanically fastened Ruviplan FG System

Ruviplan FG Membranes are manufactured from pliable PVC reinforced with woven polyester. The PVC contains stabilisers to make the membranes resistant to both high and low temperatures, is UV-resistant, and self-extinguishing in the event of fire.

  • Ruviplan FG is dynamically stable and can accommodate the stresses imposed by mechanically fastened applications, giving exceptional tensile and tear strength.
  • Ruviplan FG is vapour permeable & isideal for constructions with limited risks of interstitial condensation.
  • Ruviplan FG membranes are manufactured to withstand low temperatures, with the membranes remaining flexible even at -25 C
  • Ruviplan FG membranes are resistant to limited foot traffic and light concentrated loads associated with maintenance. On areas of frequent foot traffic, Ruviplan walkway paving treads should be used.

Ruviplan FG has been subjected to European accelerated weather tests and are expected to have a life expectancy of over 30 years. 

Ruviplan FG Membranes are suitable for use with foil-faced rigid insulation (Warm deck) or 18mm ply or OSB Sterling board (Cold deck).

Standard Overlap - Insulated


Ruvitex data sheets to read and download. Requires Adobe PDF Reader - Download Here

Ruvitex insulation in pictures

  • Decal profile on seamed roof
  • Decal profile on seamed long roof
  • Penetration flashing
  • Completed roof with aluminium coping
  • Completed roof
  • Eaves and trim
  • External trim
  • High upside
  • Parapet corner detailing
  • Parapet detailing
  • Upstand and dip
  • Aluminium coping
  • Parapet and aluminium coping
What Our Customers Say...

  • Great service from the start, very efficient and professional. The finished product was far better than we had imagined

    Mr & Mrs Peters

  • The installers were extremely polite, very tidy and efficient. Pleasure to do business with them

    Mr P Rostron

  • Good work and courtesy. Quality to be tested during next stormy and rainy season, as well as next autumn & winter

    Mr Erbolat

  • The team working on site were courteous and professional, also very patient and conscientious with the very fiddly bits.

    Claire, Oxfordshire

Roof Technology Trusted Trader and Fair Trades Registered

Roof Technology are endorsed by the
Which? Trusted Trader Scheme and registered
with Fairtrades for your peace of mind

We supply and install our flat roofing products in the following counties: Bedfordshire, Berkshire, Buckinghamshire, Hampshire, Hertfordshire, London (N, W, NW, SW) Middlesex, Oxfordshire, Surrey and Wiltshire.