Danosa Danopol Roofing
Danosa Danopol Single Ply Flat Roof Membranes
Each of the Danosa flat roof membranes that we use are designed to fulfil the requirements of any flat roof application - whether your project is a new build or a refurbishment
Danopol HS membranes are a synthetic PVC plasticised membrane with a reinforced polyester net carrier. Designed specifically for flat roof waterproofing, they are U.V. resistant. They are manufactured in line with stringent demands of the EU, to provide the best protection for your property.
Advantages & Benefits of Danosa Roofing Membranes
Waterproofing life expectancy of 35 years.
Good absorption of structural movements.
High resistance to piercing.
Conforms to Broof(t4) and flame retardant according to EN 13956.
UV resistant.
High tensile strength.
Hot air welded: Flame-free system
Great elasticity.
High resistance to tearing.
Allows adaptation to any type of geometry.
More About Danopol Danosa Single Ply Membranes
The membrane layers are installed with staggered overlaps. Joints & laps are welded with a hot air gun at temperatures of up to 500 degrees; this alleviates the need for naked flames or hot bitumen tubs that are common to other flat roofing products.
The Danosa flat roofing materials must be installed onto a sound base, using either 18mm OSB sterling board or ply (for a cold deck) or, if the specification requires a warm deck construction then a tissue or foil faced polyurethane insulation board can be used.
Danapol HSF 1.5 Flat Roof Waterproofing Membrane
A synthetic PVC plasticised membrane, reinforced with a polyester net carrier, and a 300gr geotextile fleece backing. It has a 6cm overlap free of the geotextile on the right longitudinal side, allowing overlaying and welding to the adjacent sheet.
Specifically designed for roof applications only.
Advantages & Benefits
- Good absorption of structural movements.
- High tensile strength.
- High resistance to piercing.
- Hot air welded: Flame-free system
- Great elasticity.
- High resistance to tearing.
- Allows for adaptation to any type of geometry.
- UV resistant.
- System bonded to the support by a projected adhesive.
Support
- Deck-type metal roof.
- Insulation panels.*
- Concrete substrates.
- Wooden substrates.
- Mortar substrates.
Danapol HS 1.5 Single Ply Flat Roof Waterproofing Sheet
DANOPOL HS 1.5 is a synthetic PVC plasticized membrane, Reinforced with polyester net carrier. Designed for flat roof waterproofing, U.V. resistant.
Scope
Advantages & Benefits
- Good absorption of structural movements.
- High tensile strength.
- High resistance to piercing.
- Hot air welded: Flame-free system
- Great elasticity.
- High resistance to tearing.
- Allows for adaptation to any type of geometry.
- UV resistant.
- System with Environmental Product Declaration (EPD), type 3 ecolabel.
- System fixed by metallic, plastic or induction fixation.
Support
- Deck-type metal roof.
- Overlays*
- Insulation panels.*
- Concrete substrates.
- Wooden substrates.
- Mortar substrates.
Request a FREE Quote
Ready to get started? Contact us for a free, no-obligation quote.
